Need help finding the right part?
SM02 Kennametal Light Wear Foundation Drilling Bit
SM02 Rotating Tungsten Carbide Pick – 22mm Shank
The SM02 rotating tungsten carbide pick is designed for trenching and other demanding ground-engaging cutting applications. It features a durable carbide cutting tip and a 22mm-class shank for use with compatible cutting-tool holders.
The rotating design allows the pick to turn during operation, helping distribute wear around the carbide tip for more consistent cutting performance and longer service life. The SM02 uses a K3560 carbide grade for demanding cutting conditions.
SM02 Product Specifications
- ANSI Catalog ID: SM02
- Material Number: 1010817
- Product Type: Rotating tungsten carbide pick
- Nominal Shank Size: 22mm / 0.87 in.
- Carbide Grade: K3560
- Application: Trenching and ground-engaging cutting systems
Dimensional Specifications
- Point Included Angle – Sigma: 75°
- Second Point Included Angle – Sigma B: 35°
- Tip Diameter – TD: 0.625 in.
- Tip Length – TL: 0.53 in.
- Gage Length – L1: 1.735 in.
- Body Diameter, Workpiece Side – D2: 1.50 in.
- Shank/Bore Diameter – D: 0.865 in.
- Shank Length – LS: 1.65 in.
- Overall Length – OAL: 3.385 in.
Product Features
- Rotating design helps distribute wear around the carbide cutting tip
- K3560 carbide grade for demanding cutting conditions
- 0.625-inch carbide-tip diameter
- 22mm-class shank for compatible cutting-tool holders
- Heavy-duty construction for trenching and ground-engaging applications
- Designed to provide consistent cutting performance throughout its service life
Applications
The SM02 may be used in compatible cutting systems for:
- Trenching machines
- Rock wheels
- Utility trenchers
- Construction cutting attachments
- Surface-cutting equipment
- Other equipment using a compatible 22mm pick holder
Important Fitment Information
Rotating carbide picks may look similar while using different shank diameters, carbide profiles, body dimensions, retainers and overall lengths. Confirm the specifications of your current pick and toolholder before ordering.
Please verify the following before purchase:
- ANSI catalog ID
- Material number
- Shank diameter
- Shank length
- Overall length
- Body diameter
- Carbide-tip diameter and length
- Retainer and toolholder compatibility
Contact Construction Parts PNW for assistance identifying the correct cutting pick. Please provide the machine make and model, current pick number, holder number and clear photos of the existing pick and holder.
Ordering Information
This listing is for the SM02 configuration. Other SM-series variants may use the same general product images but have different material numbers, carbide grades, tip dimensions, cutting angles and overall measurements. Carefully review the specifications listed for the selected variant before ordering.
Kennametal® is a registered trademark of its respective owner. Brand names, catalog numbers and material numbers are used for identification and cross-reference purposes only.
| Material | Light |
| Sold As | 50 Piece Box |
| Brand | Kennametal |
| Material Number | 1010817 |
| Product Family | Trenching & Surface Miners |
| Product Type | Trenching Conical Pick |
| Kennametal Category | Conical |
| Application | Trenching & Surface Mining |
| Shank Size | 22 mm |
| Shank System | 22 mm System |
| Bucket Quantity | 50 |
| Pallet Quantity | 2500 |
| Weight: | 33.00 LBS |
Warranty
Ground Engaging Tools
G.E.T. is warranted against premature breakage for a period of 90 days from the original invoice date. Ground engaging tools include, but are not limited to:
- Blades
- Bucket Teeth
- Adapters
- Side Cutters
- Hardware
- Removal Tools
Non-Stocking Parts
These are considered Special Order and are not bound by this warranty. They include, but are not limited to:
- Any non-stocking item
- Parts specifically outsourced for the customer from a secondary vendor
- Original surplus
- Parts labeled as used in As-Is condition